RGN400-5 DC Motor Control

Legacy

The RGN Series, with a robust set of features, is easy to use and at the same time, will satisfy demanding application requirements. The RGN will accept any AC input voltage between 90 and 240 VAC at 50 of 60 Hz. With the auto-ranging power supply, there are no switches to set or settings to change. These highly efficient, near unity form factor PWM regenerative drives will increase motor performance while reducing your energy costs. MOSFET power in PWM drives switch at 16 kHz (double edge modulation), to provide fast circuit response and the constant 1.05 form factor through the entire 100:1 speed range.

Potentiometer Kit 202-0003 is included with a purchase of the RG400-5

$1,010.20

Qty:

Contact the factory for volume pricing

Model Number	Enclosure	Maximum Current (ADC)	Input Voltage (VAC)	Output Voltage (VDC)	Power Range SCR Rated (PWM Rated)		Field / Shunt Supply	Braking	Reversing	Isolation
					HP	kW
RGN400-5	Chassis	5	115	0 - 90 / 130	1/8 - 1/2 (3/4)	.09 - .37 (56)	No	Yes (Regenerative)	Yes (Regenerative)	No
			230	0 - 90 / 130	1/8 - 1/2 (3/4)	.09 - .37 (56)
				0 - 180 / 240	1/4 - 1 (1 1/2)	.19 - .75 (1.1)

Features

Auto Ranging Input: No input voltage switches to set
Accepts AC or DC Input: Can accept 80-340 VDC or 90-240 VAC input
Stopping Modes: Enable (N.C.) can be set for coast or brake. Can be used for rapid starting and stopping
Dumb Circuitry: Internal circuitry for the hookup of an external dump resistor
4Q Reversing: Regenerative / 4-Quadrant drives have the ability to perform quick and contactorless braking and/or reversing-on-the-fly
Diagnostic LEDs: Motoring, Regen (torque or braking), Current Limit, Overvoltage Coast

Technical Data

1.05 Form Factor
1% Base Speed Regulation
100:1 Speed Range

Trim Pots

Forward Acceleration
Inhibit Offset
Input Offset
IR Compensation
Maximum Forward Speed
Maximum Reverse Speed
Minimum Speed
Motoring Current Limit
Regen Current Limit
Reverse Acceleration
Tach Feedback

Product Downloads

Quick Start Guide