PWL400-10 DC Motor Control

PWL Series

The PWL series adds to the versatility of our PWM offering by adding field voltage outputs for shunt-wound motors. With on-board selector switches, this series can easily be setup to accept 115 VAC or 230 VAC power. This full featured series comes with on-board fusing and cage clamp terminals to make installation simple and quick. Available in an open chassis style or NEMA 4X for applications that require protection from moisture. The almost pure DC output of the PWL series allows motors to run more efficiently and at lower speeds while achieving full torque than with the use of SCR type drives. With a wide selection of models that can run motors from 1/20 HP all the way up to 3 HP, you’re sure to find a drive that will satisfy your needs.

Potentiometer Kit 202-0003 is included with a purchase of the PWL400-10

Please login to view pricing.

Contact the factory for volume pricing

Model Number	Enclosure	Maximum Current (ADC)	Input Voltage (VAC)	Output Voltage (VDC)	Power Range SCR Rated (PWM Rated)		Field / Shunt Supply	Braking	Reversing	Isolation
					HP	kW
PWL400-10	Chassis	10*	115	0 - 90 / 130	1/4 - 1 (1 1/2)	.19 - .75 (1.1)	50 / 100	No	No	No
			230	0 - 90 / 130	1/4 - 1 (1 1/2)	.19 - .75 (1.1)	100 / 200
				0 - 180 / 240	1/2 - 2 (3)	.37 - 1.5 (2.2)

* Heat sink kit 223-0271 must be used when the continuous output current is above 5 amps.

Features

Field Supply: Voltage output to energize the field winding of a shunt-wound motor
Stopping Modes: Inhibit (N.O.) for coasting to a stop. Can be used for rapid starting and stopping
Diagnostic LEDs: Power, Current Limit
On-board Fusing: Drives include on-board fusing