MHS403-10 DC Motor Control

MHS Series

The MHS series of drives adds to our already feature rich 1Q offering. With an isolated input that can accept a grounded 4-20 mA or 0-10 VDC signal, Programmable Logic Control (PLC) or motion card connectivity is easy. The addition of cage clamp terminals on all logic connections, and power connections on some models, makes installation a breeze. Aside from having all the standard calibration adjustments offered by our other 1Q drives, the MHS series also offers start/stop push button inputs, dual voltage power capability, on-board fusing, and tachogenerator feedback inputs for even more precise control of motor speed. With a wide 1/20 - 5 horsepower range, this series can control almost any PM or shunt-wound motor.

Potentiometer Kit 202-0003 is included with a purchase of the MHS403-10

$496.24

Qty:

Contact the factory for volume pricing

Model Number	Enclosure	Maximum Current (ADC)	Input Voltage (VAC)	Output Voltage (VDC)	Power Range		Field / Shunt Supply	Braking	Reversing	Isolation
					HP	kW
MHS403-10	Chassis	10	115	0 - 90	1/8 - 1	.09 - .75	50 / 100	No	No	0 - 10 VDC 4 - 20 mA
			230	0 - 90	1/8 - 1	.09 - .75	100 / 200
				0 - 180	1/4 - 2	.19 - 1.5

Features

Field Supply: Voltage output to energize the field winding of a shunt-wound motor
3-Wire Start/Stop: On-board latching relay allows for use of momentary Start/Stop pushbottons
Isolation Logic: Allows floating or grounded 0 - 10 VDC or 4 - 20mA signals. Burr-Brown provides .01% linearity
Diagnostic LEDs: Current Limit, Power
On-board Fusing: Drives include on-board fusing
Tach Feedback: Accepts tachogenerator feedback for tighter speed regulation
Multi-turn Trim Pots: Minimum Speed and Maximum Speed use 12 turn trim pots for finer tuning

Technical Data

1.37 Form Factor
1% Base Speed Regulation over 60:1 Speed Range
0.1% Base Speed Regulation over 80:1 Speed Range with Tach

Trim Pots

Maximum Speed
Minimum Speed
Acceleration
Deceleration
Current Limit
IR Compensation
Tach

Quick Start Guide

User's Manual

2D .DXF File

3D .IGS & .STEP Files