Model Number |
Enclosure |
Maximum Current (ADC) |
Input Voltage (VAC) |
Output Voltage (VDC) |
Power Range |
Field / Shunt Supply |
Braking |
Reversing |
Isolation |
HP |
kW |
LGD410-10 |
NEMA 1 |
10* |
115 |
0 - 90 |
1/8 - 1 |
.09 - .75 |
No |
No |
No |
No |
230 |
0 - 90 |
1/8 - 1 |
.09 - .75 |
0 - 180 |
1/4 - 2 |
.19 - 1.5 |
* Heat sink kit 223-0174 must be used when the continuous output current is above 5 amps.
Features
- NEMA 1 Enclosure: Prevents accidental contact with the circuit board
- Torque Mode: Can be used for speed control or torque control for tension applications
- Stopping Modes: Inhibit (N.O. or N.C.) for coasting to a stop, can be used for frequent starting and stopping
- Selectable Inhibit: Inhibit can be set for decel to zero speed or minimum speed
- Diagnostic LEDs: Current Limit, Power
- Case LEDs: Power
- Pre-Wired Switches: ON/OFF
|
Technical Data
- 1.37 Form Factor
- 1% Base Speed Regulation
- 60:1 Speed Range
|
Trim Pots
- Maximum Speed
- Minimum Speed
- Acceleration
- Deceleration
- Current Limit
- IR Compensation
|