Competitor Search Guided Search
click here to chat with us
LGC430-1.5

LGC430-1.5

LGC Series

The LGC series is our most widely used series for general purpose 90/180 VDC brushed DC motor applications. This compact, non-filtered SCR drive series offers many user friendly adjustments. With the use of the on-board trim pots you can quickly set maximum speed, acceleration rate, deceleration rate, current limit, speed regulation, and minimum speed of your motor. With abilities to accept 115 or 230 VAC single phase power, run permanent magnet or field-wound motors, the LGC series can easily satisfy most of your motor driving needs.

$348.00
Model
Number
Enclosure Maximum
Current
(ADC)
Input
Voltage
(VAC)
Output
Voltage
(VDC)
Power Range Field / Shunt
Supply
Braking Reversing Isolation
HP kW
LGC430-1.5 NEMA 1 1.5 115 0 - 90 1/20 - 1/8 .04 - .09 50 / 100 Yes
(Dynamic
Braking
Resistor)
Yes
(Armature
Switching)
No
230 0 - 90 1/20 - 1/8 .04 - .09 100 / 200
0 - 180 1/10 - 1/4 .07 - .19

Features

  • NEMA 1 Enclosure: Prevents accidental contact with the circuit board
  • Field Supply: Voltage output to energize the field winding of a shunt-wound motor
  • Diagnostic LEDs:¬†Current Limit
  • Case LEDs: Power
  • Dynamic Brake Resistor: Braking the motor to zero speed quicker than coasting
  • Reversing: Reversing switch swaps armature leads to change motor direction. Motor must be
    stopped before changing direction
  • Pre-Wired Switches: ON/OFF, RUN/BRAKE, FORWARD/REVERSE

Technical Data

  • 1.37 Form Factor
  • 1% Base Speed Regulation
  • 60:1 Speed Range

Trim Pots

  • Maximum Speed
  • Minimum Speed
  • Acceleration
  • Deceleration
  • Current Limit
  • IR Compensation