LGC430-10 DC Motor Control

LGC Series

The LGC series is our most widely used series for general purpose 90/180 VDC brushed DC motor applications. This compact, non-filtered SCR drive series offers many user friendly adjustments. With the use of the on-board trim pots you can quickly set maximum speed, acceleration rate, deceleration rate, current limit, speed regulation, and minimum speed of your motor. With abilities to accept 115 or 230 VAC single phase power, run permanent magnet or field-wound motors, the LGC series can easily satisfy most of your motor driving needs.

$429.44

Qty:

Contact the factory for volume pricing

Model Number	Enclosure	Maximum Current (ADC)	Input Voltage (VAC)	Output Voltage (VDC)	Power Range		Field / Shunt Supply	Braking	Reversing	Isolation
					HP	kW
LGC430-10	NEMA 1	10*	115	0 - 90	1/8 - 1	.09 - .75	50 / 100	Yes (Dynamic Braking Resistor)	Yes (Armature Switching)	No
			230	0 - 90	1/8 - 1	.09 - .75	100 / 200
				0 - 180	1/4 - 2	.19 - 1.5

* Heat sink kit 223-0174 must be used when the continuous output current is above 5 amps.

Features

NEMA 1 Enclosure: Prevents accidental contact with the circuit board
Field Supply: Voltage output to energize the field winding of a shunt-wound motor
Diagnostic LEDs: Current Limit
Case LEDs: Power
Dynamic Brake Resistor: Braking the motor to zero speed quicker than coasting
Reversing: Reversing switch swaps armature leads to change motor direction. Motor must be
stopped before changing direction
Pre-Wired Switches: ON/OFF, RUN/BRAKE, FORWARD/REVERSE

Technical Data

1.37 Form Factor
1% Base Speed Regulation
60:1 Speed Range

Trim Pots

Maximum Speed
Minimum Speed
Acceleration
Deceleration
Current Limit
IR Compensation