click here to chat with us
LGC410-10 DC Motor Control

LGC410-10 DC Motor Control

LGC Series

The LGC series is our most widely used series for general purpose 90/180 VDC brushed DC motor applications. This compact, non-filtered SCR drive series offers many user friendly adjustments. With the use of the on-board trim pots you can quickly set maximum speed, acceleration rate, deceleration rate, current limit, speed regulation, and minimum speed of your motor. With abilities to accept 115 or 230 VAC single phase power, run permanent magnet or field-wound motors, the LGC series can easily satisfy most of your motor driving needs.

AC & DC Manuals

Let's Talk About Your Project

$364.17

Contact the factory for volume pricing

Model
Number
Enclosure Maximum
Current
(ADC)
Input
Voltage
(VAC)
Output
Voltage
(VDC)
Power Range Field / Shunt
Supply
Braking Reversing Isolation
HP kW
LGC410-10 NEMA 1 10* 115 0 - 90 1/8 - 1 .09 - .75 50 / 100 No No No
230 0 - 90 1/8 - 1 .09 - .75 100 / 200
0 - 180 1/4 - 2 .19 - 1.5

* Heat sink kit 223-0174 must be used when the continuous output current is above 5 amps.

Features

  • NEMA 1 Enclosure: Prevents accidental contact with the circuit board
  • Field Supply: Voltage output to energize the field winding of a shunt-wound motor
  • Stopping Modes: Inhibit (N.O.) for coasting to a stop. Can be used for frequent starting and stopping
  • Diagnostic LEDs: Current Limit
  • Case LEDs: Power
  • Pre-Wired Switches: ON/OFF

Technical Data

  • 1.37 Form Factor
  • 1% Base Speed Regulation
  • 60:1 Speed Range

Trim Pots

  • Maximum Speed
  • Minimum Speed
  • Acceleration
  • Deceleration
  • Current Limit
  • IR Compensation