LGC400-10-QDT DC Motor Control

LGC Series

-QDT: Provides a quick disconnect terminal for quicker wiring and setup.

The LGC series is our most widely used series for general purpose 90/180 VDC brushed DC motor applications. This compact, non-filtered SCR drive series offers many user friendly adjustments. With the use of the on-board trim pots you can quickly set maximum speed, acceleration rate, deceleration rate, current limit, speed regulation, and minimum speed of your motor. With abilities to accept 115 or 230 VAC single phase power, run permanent magnet or field-wound motors, the LGC series can easily satisfy most of your motor driving needs.

Potentiometer Kit 202-0069 is included with a purchase of the LGC400-10-QDT

AC & DC Manuals

Let's Talk About Your Project

$215.29

Qty:

Contact the factory for volume pricing

Model Number	Enclosure	Maximum Current (ADC)	Input Voltage (VAC)	Output Voltage (VDC)	Power Range		Field / Shunt Supply	Braking	Reversing	Isolation
					HP	kW
LGC400-10-QDT	Chassis	10*	115	0 - 90	1/8 - 1	.09 - .75	50 / 100	No	No	No
			230	0 - 90	1/8 - 1	.09 - .75	100 / 200
				0 - 180	1/4 - 2	.19 - 1.5

* Heat sink kit 223-0159 must be used when the continuous output current is above 5 amps.

Features

ACE Footprint: Traditional ACE mounting pattern and footprint
Field Supply: Voltage output to energize the field winding of a shunt-wound motor
Stopping Modes: Inhibit (N.O.) for coasting to a stop. Can be used for frequent starting and stopping
Diagnostic LEDs: Current Limit, Power
Meter: 2-pin plug supplies an unregulated 9 VDC for powering external devices
Quick Disconnect Terminal: Allows for quicker wiring and setup