DC Motor Speed Controller
American Control Electronics carries a wide selection of DC motor controllers that exceed industry standards. A DC motor controller manipulates the position, speed, or torque of a DC-powered motor and easily reverses, so the DC drive current runs in the opposite direction. Enjoy higher starting torque, quick starting and stopping, reversing, variable speeds with voltage input and more. Select technology type, input voltage, output voltage, continuous current, enclosure, braking type, reversing type, and isolation.
The DC motor speed control function is perhaps the most common manipulation used in DC controllers. This speed can be controlled in four different ways: flux variation, armature voltage variation, a change in the supply voltage, and pulse width modulation (PWM). PWM is the technique commonly used for achieving speed control in a DC motor. DC Drives deliver DC motor speed controller energy through a series of pulses rather than a continuous signal. By altering the pulse width, the DC motor controller is able to regulate the energy flow to keep it consistent.
While less popular, DC motor torque control is achieved by a DC motor drive regulating the armature current. Since the armature current isn’t regulated, the motor can operate at whatever speed necessary to achieve the desired torque level. The torque level can remain constant achieving a “taper tension effect” for a fixed input reference and torque mode center winders. However, the machine operator can in some circumstances increase the torque set-point as diameter increases.
American Control Electronics offers a variety of DC motor controllers that include various operation modes both separately and together. It simply depends on the application and needs of your DC motor speed controller systems. However, due to such diversity, it can be difficult to find the DC motor controller that fits your mold. Be sure to understand the voltage ranges and types of control needed to properly operate your control system.
View our DC Motor Controllers selection below.
Narrow Your Search
Motor Voltage
-
12 VDC motor with 12 VAC source
-
12 VDC motor with 12 VDC source
-
12 VDC motor with 24 VDC source
-
12 VDC motor with 36 VDC source
-
12 VDC motor with 48 VDC source
-
12 VDC motor with 115 VAC source
-
12 VDC motor with 230 VAC source
-
24 VDC motor with 24 VAC source
-
24 VDC motor with 24 VDC source
-
24 VDC motor with 36 VDC source
-
24 VDC motor with 48 VDC source
-
24 VDC motor with 115 VAC source
-
24 VDC motor with 230 VAC source
-
36 VDC motor with 36 VDC source
-
36 VDC motor with 48 VDC source
-
36 VDC motor with 115 VAC source
-
36 VDC motor with 230 VAC source
-
48 VDC motor with 48 VDC source
-
48 VDC motor with 115 VAC source
-
48 VDC motor with 230 VAC source
-
90 VDC motor with 115 VAC source
-
90 VDC motor with 230 VAC source
-
115 VDC motor with 115 VAC source
-
115 VDC motor with 230 VAC source
-
130 VDC motor with 115 VAC source
-
130 VDC motor with 230 VAC source
-
180 VDC motor with 115 VAC source
-
180 VDC motor with 230 VAC source
Field Supply
Motor Amperage
Operation Mode
Remote Signal
Feedback
Communication
DCN100-1.5 Low Voltage Motor Control
Input Voltage:
12 VDC
Output Voltage:
0-12 VDC
Field Voltage:
N/A
Continuous Current:
1 Amp
Peak Current:
1.5 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
PWM
Isolation:
No
Remote Signal:
0-3.3 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$91.94
DCH401-1.5 Low Voltage Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
3 Amps @ 12 VDC, 1.5 Amps @ 24 VDC
Peak Current:
4 Amps @ 12 VDC, 2 Amps @ 24 VDC for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
Yes
Remote Signal:
0-5 VDC, 0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$218.13
DCH401-5 Low Voltage Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps
Peak Current:
7.5 Amps for 10 seconds
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
Yes
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$437.62
DCH401-5-CYC Low Voltage Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps
Peak Current:
7.5 Amps for 10 seconds
Enclosure:
Chassis
Operation Mode:
Cycling Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
Yes
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$438.98
DCH401-5-TRQ Low Voltage Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps
Peak Current:
7.5 Amps for 10 seconds
Enclosure:
Chassis
Operation Mode:
Torque Control
Braking:
Regenerative
Reversing:
No Preference
Technology:
PWM
Isolation:
Yes
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$443.07
DCH403-10 Low Voltage Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0-12 / 0-24 / 0-36 / 0-48 VDC
Field Voltage:
N/A
Continuous Current:
20 Amps @12 VDC, 10 Amps @ 24 VDC, 6.7 Amps @ 36 VDC, 5 Amps @ 48 VDC
Peak Current:
30 Amps @ 12 VDC, 15 Amps @ 24 VDC, 10 Amps @ 36 VDC, 7.5 Amps @ 48 VDC for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control, Torque Control, Cycling Control, Positioning Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
Yes
Remote Signal:
0 to ±5 VDC, 0 to ±10 VDC, 4-20 mA
Feedback:
Resistive
Communication:
None
# of Axis:
1
Certifications:
RoHS
$826.00
DCN100-1.5-PT1 Low Voltage Motor Control
Input Voltage:
12 VDC
Output Voltage:
0-12 VDC
Field Voltage:
N/A
Continuous Current:
1 Amp
Peak Current:
1.5 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No
Reversing:
No Preference
Reversing:
No
Technology:
PWM
Isolation:
No
Remote Signal:
N/A
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$99.52
DCR300-60 Low Voltage Motor Control
Input Voltage:
12 / 24 VDC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
30 Amps
Peak Current:
60 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control, Torque Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 61800-5-1 (US&C)
$443.07
DCR600-60 Low Voltage Motor Control
Input Voltage:
36 / 48 VDC
Output Voltage:
0-36 / 0-48 VDC
Field Voltage:
N/A
Continuous Current:
30 Amps
Peak Current:
60 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control, Torque Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 61800-5-1 (US&C)
$504.42
ELC100-10 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-90 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
0-6 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$150.49
ELC110-5 DC Motor Control
Motor Voltage:
90 VDC motor with 115 VAC source
Input Voltage:
115 VAC
Output Voltage:
0-90 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps
Enclosure:
NEMA 1
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
N/A
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$373.64
LGC400-1.5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
1.5 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$162.61
LGC400-1.5-QDT DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
1.5 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$210.71
LGC400-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$166.05
LGC400-10-QDT DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$215.29
LGC410-1.5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
1.5 Amps
Enclosure:
NEMA 1
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$363.05
LGC410-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
NEMA 1
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$364.17
LGC430-1.5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
1.5 Amps
Enclosure:
NEMA 1
Operation Mode:
Speed Control
Braking:
Dynamic Braking
Reversing:
Armature Switching
Technology:
SCR
Isolation:
No
Remote Signal:
0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$416.84
LGC430-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
NEMA 1
Operation Mode:
Speed Control
Braking:
Dynamic Braking
Reversing:
Armature Switching
Technology:
SCR
Isolation:
No
Remote Signal:
0-2.5 VDC
Remote Signal:
0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$429.44
LGC440-1.5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
1.5 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$567.13
LGC440-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
10 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$580.77
LGD400-1.5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
1.5 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control, Torque Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
0-2.5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA, CE
$170.63
LGD400-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control, Torque Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
0-2.5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA, CE
$170.63
LGD410-1.5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
1.5 Amps
Enclosure:
NEMA 1
Operation Mode:
Speed Control, Torque Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
0-2.5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA, CE
$350.67
LGD410-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
NEMA 1
Operation Mode:
Speed Control, Torque Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
0-2.5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA, CE
$352.72
LGD430-1.5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
1.5 Amps
Enclosure:
NEMA 1
Operation Mode:
Speed Control, Torque Control
Braking:
Dynamic Braking
Reversing:
Armature Switching
Technology:
SCR
Isolation:
No
Remote Signal:
0-2.5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA, CE
$453.53
LGD430-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
NEMA 1
Operation Mode:
Speed Control, Torque Control
Braking:
Dynamic Braking
Reversing:
Armature Switching
Technology:
SCR
Isolation:
No
Remote Signal:
0-2.5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
$449.48
LGD440-1.5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
1.5 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control, Torque Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
0-2.5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA, CE
$567.13
LGD440-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
10 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control, Torque Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
No
Remote Signal:
0-2.5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA, CE
$580.77
LGM103-10 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-90 VDC
Field Voltage:
50, 100 VDC
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
Yes
Remote Signal:
0-10 VDC, 4-20 mA
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$414.44
LGM103-3 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-90 VDC
Field Voltage:
50, 100 VDC
Continuous Current:
3 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
Yes
Remote Signal:
0-10 VDC, 4-20 mA
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$414.44
LGM303-10 DC Motor Control
Input Voltage:
230 VAC
Output Voltage:
0-180 VDC
Field Voltage:
100, 200 VDC
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
Yes
Remote Signal:
0-10 VDC, 4-20 mA
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$436.26
LGM303-3 DC Motor Control
Input Voltage:
230 VAC
Output Voltage:
0-180 VDC
Field Voltage:
100, 200 VDC
Continuous Current:
3 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
Yes
Remote Signal:
0-10 VDC, 4-20 mA
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$436.26
LGP101-10 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-90 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
Yes
Remote Signal:
0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$286.29
LGP101-2 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-90 VDC
Field Voltage:
N/A
Continuous Current:
2 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
Yes
Remote Signal:
0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C)
$286.29
LGP301-10 DC Motor Control
Input Voltage:
230 VAC
Output Voltage:
0-180 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
Yes
Remote Signal:
0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$297.74
LGP403-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
10 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
Yes
Remote Signal:
0-10 VDC, 4-20 mA
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 61800-5-1 (US&C)
$372.18
LGP443-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
10 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
Yes
Remote Signal:
0-10 VDC, 4-20 mA
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$824.52
LGP443-3 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
3 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
Yes
Remote Signal:
0-10 VDC, 4-20 mA
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C)
$822.23
LVA300-1 Low Voltage Motor Control
Input Voltage:
12 / 24 VAC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
1 Amp
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
N/A
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$235.85
MGB400-1.5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
1.5 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control, Torque Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
SCR
Isolation:
No
Remote Signal:
0 to ±10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 61800-5-1 (US&C)
$223.58
MGB400-11 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
8 Amps / 11 Amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Operation Mode:
Speed Control, Torque Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
SCR
Isolation:
No
Remote Signal:
0 to ±10 VDC
Feedback:
None
Communication:
None
$223.58
MGC403-1.5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
1.5 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control, Torque Control, Cycling Control, Positioning Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
SCR
Isolation:
Yes
Remote Signal:
0 to ±10 VDC, 4-20 mA
Feedback:
Resistive, Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 61800-5-1
$293.11
MGC403-1.5-PNPL DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
1.5 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control, Torque Control, Cycling Control, Positioning Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
SCR
Isolation:
Yes
Remote Signal:
0 to ±10 VDC, 4-20 mA
Feedback:
Resistive, Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 61800-5-1
$293.11
MGC403-11 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
8 Amps / 11 Amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control, Torque Control, Cycling Control, Positioning Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
SCR
Isolation:
Yes
Remote Signal:
0 to ±10 VDC, 4-20 mA
Feedback:
Resistive, Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$293.11
MHS403-1.5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
1.5 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
Yes
Remote Signal:
0-10 VDC, 4-20 mA
Feedback:
Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$496.24
MHS403-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
10 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
Yes
Remote Signal:
0-10 VDC, 4-20 mA
Feedback:
Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$496.24
MHS403-25 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
25 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
Yes
Remote Signal:
0-10 VDC, 4-20 mA
Feedback:
Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$1,064.73
MHS443-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
10 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
Yes
Remote Signal:
0-10 VDC, 4-20 mA
Feedback:
Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$991.12
MTU100-11.5 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-90 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps per axis, 6.5 Amps total / 10 Amps per axis, 11.5 Amps total with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control, Torque Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
No
Remote Signal:
0-4.6 VDC
Feedback:
None
Communication:
None
# of Axis:
2
Certifications:
RoHS, UL Listed 508C
$263.39
MTU400-11.5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps per axis, 6.5 Amps total / 10 Amps per axis, 11.5 Amps total with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control, Torque Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
No
Remote Signal:
0-4.6 VDC
Feedback:
None
Communication:
None
# of Axis:
2
Certifications:
RoHS, UL Listed 508C
$343.86
MUN100-10 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-90 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
No
Remote Signal:
0-4.5 VDC
Feedback:
None
Communication:
None
# of Axis:
2
Certifications:
RoHS, UL Listed 508C
$229.93
PAT440-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
10 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
No
Remote Signal:
0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$437.62
PAT443-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
10 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
Yes
Remote Signal:
0-10 VDC, 4-20 mA
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$608.03
PAT450-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Enclosure:
NEMA 4X
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
Armature Switching
Technology:
SCR
Isolation:
No
Remote Signal:
0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$587.58
PMB703-3 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
3 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control, Torque Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Feedback:
None
Isolation:
Yes
Remote Signal:
0 to ±5 VDC, 0 to ±10 VDC, 4-20 mA
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 61800-5-1
$612.12
PMB703-7 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
7 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control, Torque Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
Yes
Remote Signal:
0 to ±5 VDC, 0 to ±10 VDC, 4-20 mA
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 61800-5-1
$639.38
PWL400-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
5 Amps / 10 amps with heat sink
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
0-2.5 VDC
Remote Signal:
0-2.5 VDC @ 115 VAC, 0-5 VDC @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$606.66
PWL400-15 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
15 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
0-2.5 VDC @ 115 VAC, 0-5 VDC @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C)
$921.59
PWL400-3 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
3 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
0-2.5 VDC @ 115 VAC, 0-5 VDC @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$419.90
PWL400-5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
5 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
0-2.5 VDC @ 115 VAC, 0-5 VDC @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$498.97
PWL440-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
10 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
0-2.5 VDC @ 115 VAC, 0-5 VDC @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$976.12
PWL440-10-JOG DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
10 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
0-2.5 VDC @ 115 VAC, 0-5 VDC @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$842.07
PWL440-3 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
3 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
0-2.5 VDC @ 115 VAC, 0-5 VDC @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, CSA
$774.35
PWM400-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA, CE
$416.67
PWM400-2 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
2 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$274.84
PWM400-5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$288.58
PWM401-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
Yes
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA, CE
$468.34
PWM401-2 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
2 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
Yes
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$328.66
PWM401-5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
Yes
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$348.13
PWP100-10 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-130 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$242.78
PWP100-2 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-130 VDC
Field Voltage:
N/A
Continuous Current:
2 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$207.27
PWP100-2-QDT DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-130 VDC
Field Voltage:
N/A
Continuous Current:
2 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$242.78
PWP100-5 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-130 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$232.47
PWP101-10 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-130 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
Yes
Remote Signal:
0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$305.76
PWP101-2 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-130 VDC
Field Voltage:
N/A
Continuous Current:
2 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
Yes
Remote Signal:
0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$284.00
PWP101-5 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-130 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
Yes
Remote Signal:
0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$290.88
PWP110-1 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-130 VDC
Field Voltage:
N/A
Continuous Current:
1 Amp
Enclosure:
NEMA 1
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
N/A
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$286.29
PWP110-3 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-130 VDC
Field Voltage:
N/A
Continuous Current:
3 Amps
Enclosure:
NEMA 1
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
PWM
Isolation:
No
Remote Signal:
N/A
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$289.72
RGA400-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
7 Amps / 10 Amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
SCR
Isolation:
No
Remote Signal:
0 to ±10 VDC
Feedback:
Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$621.66
RGA400-3 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
3 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
SCR
Isolation:
No
Remote Signal:
0 to ±10 VDC
Feedback:
Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$602.58
RGA403-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
7 Amps / 10 Amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
SCR
Isolation:
Yes
Remote Signal:
0 to ±250 VDC, 1-5 mA, 4-20 mA, 10-50 mA
Feedback:
Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$826.16
RGA403-3 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
3 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
SCR
Isolation:
Yes
Remote Signal:
0 to ±250 VDC, 1-5 mA, 4-20 mA, 10-50 mA
Feedback:
Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$813.88
RGA440-10 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
10 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
SCR
Isolation:
No
Remote Signal:
0 to ±10 VDC
Feedback:
Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Recognized 508C (US&C), CSA
$1,052.47
RGA440-10-CYC Cycling Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
10 Amps
Enclosure:
NEMA 4X
Operation Mode:
Cycling Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
SCR
Isolation:
No
Remote Signal:
N/A
Feedback:
Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$1,285.59
RGA440-3 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
3 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
SCR
Isolation:
No
Remote Signal:
0 to ±10 VDC
Feedback:
Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$1,042.92
RGA440-3-CYC Cycling Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
3 Amps
Enclosure:
NEMA 4X
Operation Mode:
Cycling Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
SCR
Isolation:
No
Remote Signal:
N/A
Feedback:
Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$1,278.77
RGF403-25 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
25 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
SCR
Isolation:
Yes
Remote Signal:
0 to ±250 VDC, 1-5 mA, 4-20 mA, 10-50 mA
Feedback:
Tachogenerator
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$1,537.80
SPM100-2 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-90 VDC
Field Voltage:
N/A
Continuous Current:
2 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
No
Remote Signal:
N/A
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$129.41
SPM100-2-PT1 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-90 VDC
Field Voltage:
N/A
Continuous Current:
2 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
No
Remote Signal:
N/A
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$135.13
SPM100-3 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-90 VDC
Field Voltage:
N/A
Continuous Current:
3 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
No
Remote Signal:
N/A
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$137.34
SPM100-3-PT1 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-90 VDC
Field Voltage:
N/A
Continuous Current:
3 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
No
Remote Signal:
N/A
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$132.92
SPM100-3-PT2 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-90 VDC
Field Voltage:
100 VDC
Continuous Current:
3 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
No
Remote Signal:
N/A
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$190.86
SPM100-3-PT3 DC Motor Control
Input Voltage:
115 VAC
Output Voltage:
0-90 VDC
Field Voltage:
N/A
Continuous Current:
3 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
No
Remote Signal:
N/A
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$137.70
SPM200-3-PT1 DC Motor Control
Input Voltage:
230 VAC
Output Voltage:
0-90 VDC
Field Voltage:
100 VDC
Continuous Current:
3 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
No
Remote Signal:
N/A
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$154.06
SPM200-3-PT2 DC Motor Control
Input Voltage:
230 VAC
Output Voltage:
0-90 VDC
Field Voltage:
100 VDC
Continuous Current:
3 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No Braking
Reversing:
No Reversing
Technology:
SCR
Isolation:
No
Remote Signal:
N/A
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$190.86
DCN200-1.5 Low Voltage Motor Control
Input Voltage:
24 VDC
Output Voltage:
0-24 VDC
Field Voltage:
N/A
Continuous Current:
1 Amp
Peak Current:
1.5 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
PWM
Isolation:
No
Remote Signal:
0-3.3 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$91.94
LGC400-10-VRT DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 90 / 0 - 180 VDC
Field Voltage:
50, 100 / 100, 200 VDC
Continuous Current:
5 Amps / 10 amps with heat sink
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
SCR
Isolation:
No
Remote Signal:
0-1.4 VDC @ 115 VAC, 0-2.8 @ 230 VAC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C, CSA
$321.73
PMB743-5 DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
5 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control, Torque Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Remote Signal:
0 to ±5 VDC, 0 to ±10 VDC, 4-20 mA
Isolation:
Yes
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 61800-5-1
$902.50
DCN200-1.5-PT1 Low Voltage Motor Control
Input Voltage:
24 VDC
Output Voltage:
0-24 VDC
Field Voltage:
N/A
Continuous Current:
1 Amp
Peak Current:
1.5 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
PWM
Isolation:
No
Remote Signal:
N/A
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$500.00
PMB743-5.5-STL DC Motor Control
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 130 / 0 - 180 VDC
Field Voltage:
N/A
Continuous Current:
5.5 Amps
Enclosure:
NEMA 4X
Operation Mode:
Speed Control, Torque Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
Yes
Remote Signal:
0 to ±5 VDC, 0 to ±10 VDC, 4-20 mA
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 61800-5-1
$1,130.17
DCN100-2-PT1 Low Voltage Motor Control
Input Voltage:
12 VDC
Output Voltage:
0-12 VDC
Field Voltage:
N/A
Continuous Current:
1 Amp
Peak Current:
2 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
PWM
Isolation:
No
Remote Signal:
N/A
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$113.15
DCN300-6 Low Voltage Motor Control
Input Voltage:
12 / 24 VDC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
3 Amps
Peak Current:
6 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$178.59
DCR300-6 Low Voltage Motor Control
Input Voltage:
12 / 24 VDC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
3 Amps
Peak Current:
6 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC, 0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$178.59
DCR300-6-CYC Low Voltage Motor Control
Input Voltage:
12 / 24 VDC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Enclosure:
Chassis
Operation Mode:
Cycling Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC, 0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$185.41
DCR600-6 Low Voltage Motor Control
Input Voltage:
36 / 48 VDC
Output Voltage:
0-36 / 0-48 VDC
Field Voltage:
N/A
Continuous Current:
3 Amps
Peak Current:
6 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC, 0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$190.86
DCN300-16 Low Voltage Motor Control
Input Voltage:
12 / 24 VDC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
16 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
PWM
Isolation:
No
Remote Signal:
0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$414.44
DCR300-20 Low Voltage Motor Control
Input Voltage:
12 / 24 VDC
Output Voltage:
0-36 / 0-48 VDC
Field Voltage:
N/A
Continuous Current:
10 Amps
Peak Current:
20 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$314.92
DCR300-30 Low Voltage Motor Control
Input Voltage:
12 / 24 VDC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
15 Amps
Peak Current:
30 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$334.01
DCR300-30-WAG Low Voltage Motor Control
Input Voltage:
12 / 24 VDC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
15 Amps
Peak Current:
30 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS
$443.07
DCN300-60 Low Voltage Motor Control
Input Voltage:
12 / 24 VDC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
60 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
PWM
Isolation:
No
Remote Signal:
0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$504.42
DCN600-60 Low Voltage Motor Control
Input Voltage:
12 / 24 VDC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
60 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
No
Reversing:
No
Technology:
PWM
Isolation:
No
Remote Signal:
0-10 VDC
Feedback:
None
Communication:
None
# of Axis:
1
Certifications:
RoHS, UL Listed 508C
$504.42
DCR300-120 Low Voltage Motor Control
Input Voltage:
12 / 24 VDC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
60 Amps
Peak Current:
120 Amps for 1minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
Certifications:
RoHS
$655.74
DCR300-250 Low Voltage Motor Control
Input Voltage:
12 / 24 VDC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
120 Amps
Continuous Current:
250 Amps
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
Certifications:
RoHS
$1,031.12
DCR300-250-WAG Low Voltage Motor Control
Input Voltage:
12 / 24 VDC
Output Voltage:
0-12 / 0-24 VDC
Field Voltage:
N/A
Continuous Current:
120 Amps
Peak Current:
250 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
Certifications:
RoHS
$910.69
DCR600-250 Low Voltage Motor Control
Input Voltage:
36 / 48 VDC
Output Voltage:
0-36 / 0-48 VDC
Field Voltage:
N/A
Continuous Current:
100 Amps
Peak Current:
250 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
Certifications:
RoHS
$887.50
DCR600-250-WAG Low Voltage Motor Control
Input Voltage:
36 / 48 VDC
Output Voltage:
0-36 / 0-48 VDC
Field Voltage:
N/A
Continuous Current:
100 Amps
Peak Current:
250 Amps for 1 minute
Enclosure:
Chassis
Operation Mode:
Speed Control
Braking:
Regenerative
Reversing:
Regenerative
Technology:
PWM
Isolation:
No
Remote Signal:
0-5 VDC
Feedback:
None
Communication:
None
Certifications:
RoHS
$874.57