DCR Series

Model
Number
Enclosure Maximum
Current
(ADC)
Peak
Current
(ADC)*
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Power Range
Continuous (Peak)
Braking Reversing Isolation
HP kW
DCR300-6 Chassis 3 6 12 0 - 12 1/100 - 1/30 (1/15) .007 - .025 (.05) Yes
(Regenerative)
Yes
(Regenerative)
No
24 0 - 12 1/100 - 1/30 (1/15) .007 - .025 (.05)
0 - 24 1/50 - 1/15 (1/8) .015 - .050 (.09)
DCR600-6 Chassis 3 6 36 0 - 36 1/40 - 1/10 (1/5) .019 - .07 (.15) Yes
(Regenerative)
Yes
(Regenerative)
No
48 0 - 36 1/40 - 1/10 (1/5) .019 - .07 (.15)
0 - 48 1/25 - 1/8 (1/4) .030 - .09 (.19)
DCR300-20 Chassis 10 20 12 0 - 12 1/75 - 1/8 (1/4) .010 - .09 (.19) Yes
(Regenerative)
Yes
(Regenerative)
No
24 0 - 12 1/75 - 1/8 (1/4) .010 - .09 (.19)
0 - 24 1/40 - 1/4 (1/2) .019 - .19 (.37)
DCR300-30 Chassis 15 30 12 0 - 12 1/50 - 1/6 (3/8) .015 - .12 (.28) Yes
(Regenerative)
Yes
(Regenerative)
No
24 0 - 12 1/50 - 1/6 (3/8) .015 - .12 (.28)
0 - 24 1/25 - 1/3 (3/4) .030 - .25 (.56)
DCR300-60 Chassis 30 60 12 0 - 12 1/25 - 3/8 (3/4) .03 - .28 (.56) Yes
(Regenerative)
Yes
(Regenerative)
No
24 0 - 12 1/25 - 3/8 (3/4) .03 - .28 (.56)
0 - 24 1/12 - 3/4 (1 1/2) .06 - .56 (1.1)
DCR300-120 Chassis 60 120 12 0 - 12 1/12 - 3/4 (1 1/2) .06 - .56 (1.1) Yes
(Regenerative)
Yes
(Regenerative)
No
24 0 - 12 1/12 - 3/4 (1 1/2) .06 - .56 (1.1)
0 - 24 1/6 - 1 1/2 (3) .12 - 1.1 (2.2)
DCR300-250 Chassis 120** 250** 12 0 - 12 1/6 - 1 1/2 (3 1/8) .12 - 1.1 (2.3) Yes
(Regenerative)
Yes
(Regenerative)
No
24 0 - 12 1/6 - 1 1/2 (3 1/8) .12 - 1.1 (2.3)
0 - 24 1/3 - 3 (6 1/4) .25 - 2.2 (4.7)
DCR600-250 Chassis 100*** 250*** 36 0 - 36 1/2 - 3 3/4 (9 1/2) .37 - 2.8 (7.1) Yes
(Regenerative)
Yes
(Regenerative)
No
48 0 - 36 1/2 - 3 3/4 (9 1/2) .37 - 2.8 (7.1)
0 - 48 1 - 5 (12 1/2) .75 - 3.7 (9.3)
* Peak time of 1 minute.
** De-rate by 15% when mounted horizontally.
*** De-rate by 20% when mounted horizontally.

The DCR series are microprocessor based, low voltage PWM drives that are capable of braking and reversing regeneratively. The microprocessor allows for custom programming to fit any OEMs custom needs, sometimes eliminating the need for a PLC and/or sensors. They can even be programmed for use in the field without trimmer potentiometers, creating a simple install and a level of security for OEMs. Some models contain a “sleep mode” which extends battery life, and some contain a Fault LED with a built in flashing code for under voltage, over voltage, current limit, overheat, and short circuit. With features like pre-charge circuits, brake outputs, directionally based inhibits, you’re sure to find a drive to fit your needs.