DCN Series

Model
Number
Enclosure Maximum
Current
(ADC)
Peak
Current
(ADC)
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Power Range
Continuous (Peak)
Braking Reversing Isolation
HP kW

DCN100-1.5

Chassis 1 1.5* 12 0 - 12** 1/100 - 1/80 (1/60) .007 - .009 (.012) No No No

DCN100-1.5-PT1

Chassis 1 1.5* 12 0 - 12** 1/100 - 1/80 (1/60) .007 - .009 (.012) No No No

DCN200-1.5

Chassis 1 1.5* 24 0 - 24** 1/50 - 1/40 (1/30) .015 - .019 (.025) No No No

DCN200-1.5-PT1

Chassis 1 1.5* 24 0 - 24** 1/50 - 1/40 (1/30) .015 - .019 (.025) No No No
DCN300-6 Chassis 3 6* 12 0 - 12 1/100 - 1/30 (1/15) .007 - .025 (.05) No No No
24 0 - 12 1/100 - 1/30 (1/15) .007 - .025 (.05)
0 - 24 1/50 - 1/15 (1/8) .015 - .05 (.09)
DCN300-16 Chassis 16 16 12 0 - 12 1/20 - 1/5 (1/5) .04 - .15 (.15) No No No
24 0 - 12 1/20 - 1/5 (1/5) .04 - .15 (.15)
0 - 24 1/10 - 2/5 (2/5) .07 - .30 (.30)
DCN300-60 Chassis 60 60 12 0 - 12 1/8 - 3/4 (3/4) .09 - .56 (.56) No No No
24 0 - 12 1/8 - 3/4 (3/4) .09 - .56 (.56)
0 - 24 1/4 - 1 1/2 (1 1/2) .19 - 1.1 (1.1)
DCN600-60 Chassis 60 60 36 0 - 36 1/3 - 2 1/4 (2 1/4) .25 - 1.7 (1.7) No No No
48 0 - 36 1/3 - 2 1/4 (2 1/4) .25 - 1.7 (1.7)
0 - 48 1/2 - 3 (3) .37 - 2.2 (2.2)
* Peak time of 1 minute.
** Output Voltage = Input Voltage - 1 VDC

The DCN series of drives are reliable low voltage drives that provide both speed control and current limiting in low HP applications. Roughly the size of a quarter, these drives are being implemented in applications in which the customer traditionally powers the motor directly off a power supply or battery, which doesn’t allow for control or protection of the motor. The drive allows the OEM speed control of their motor, but also provides a current limit trim pot to protect the motor in the case of an overload or jam.