RGA Series

Model
Number
Enclosure Maximum
Current
(ADC)
Input
Voltage
(VAC)
Output
Voltage
(VDC)
Power Range Field / Shunt
Supply
(VDC)
Braking Reversing Isolation
HP kW
RGA400-3 Chassis 3 115 0 - 90 1/20 - 1/4 .04 - .19 50 / 100 Yes
(Regenerative)
Yes
(Regenerative)
No
230 0 - 90 1/20 - 1/4 .04 - .19 100 / 200
0 - 180 1/10 - 1/2 .07 - .37
RGA403-3 Chassis 3 115 0 - 90 1/20 - 1/4 .04 - .19 50 / 100 Yes
(Regenerative)
Yes
(Regenerative)
0 ± 250 VDC
1-5, 4-20, 10-50 mA
230 0 - 90 1/20 - 1/4 .04 - .19 100 / 200
0 - 180 1/10 - 1/2 .07 - .37
RGA400-10 Chassis 10* 115 0 - 90 1/8 - 1 .09 - .75 50 / 100 Yes
(Regenerative)
Yes
(Regenerative)
No
230 0 - 90 1/8 - 1 .09 - .75 100 / 200
0 - 180 1/4 - 2 .19 - 1.5
RGA403-10 Chassis 10* 115 0 - 90 1/8 - 1 .09 - .75 50 / 100 Yes
(Regenerative)
Yes
(Regenerative)
0 ± 250 VDC
1-5, 4-20, 10-50 mA
230 0 - 90 1/8 - 1 .09 - .75 100 / 200
0 - 180 1/4 - 2 .19 - 1.5
RGA440-3 NEMA 4X 3 115 0 - 90 1/20 - 1/4 .04 - .19 50 / 100 Yes
(Regenerative)
Yes
(Regenerative)
No
230 0 - 90 1/20 - 1/4 .04 - .19 100 / 200
0 - 180 1/10 - 1/2 .07 - .37
RGA440-10 NEMA 4X 10 115 0 - 90 1/8 - 1 .09 - .75 50 / 100 Yes
(Regenerative)
Yes
(Regenerative)
No
230 0 - 90 1/8 - 1 .09 - .75 100 / 200
0 - 180 1/4 - 2 .19 - 1.5
* Heat sink kit 223-0235 must be used when the continuous output current is above 5 amps.

The RGA series of 4Q drives is well suited for applications that require the control of overhauling loads, frequent reversing or breaking. With on-board fusing and cage clamp power and logic terminals, installation has been made simple. Available in either open chassis style or in a NEMA 4X enclosure, the RGA series can be used in a wide range of environments. With the available field supply for shunt-wound motors, full assortment of adjustments that are standard on all our 4Q drives, and optional factory installed isolation module, the RGA series is a flexible and well equipped member of our 4Q family of drives.