LGC Series

Model
Number
Enclosure Maximum
Current
(ADC)
Input
Voltage
(VAC)
Output
Voltage
(VDC)
Power Range Field / Shunt
Supply
(VDC)
Braking Reversing Isolation
HP kW
LGC400-1.5 Chassis 1.5 115 0 - 90 1/20 - 1/8 .04 - .09 50 / 100 No No No
230 0 - 90 1/20 - 1/8 .04 - .09 100 / 200
0 - 180 1/10 - 1/4 .07 - .19
LGC400-1.5-QDT Chassis 1.5 115 0 - 90 1/20 - 1/8 .04 - .09 50 / 100 No No No
230 0 - 90 1/20 - 1/8 .04 - .09 100 / 200
0 - 180 1/10 - 1/4 .07 - .19
LGC400-10 Chassis 10* 115 0 - 90 1/8 - 1 .09 - .75 50 / 100 No No No
230 0 - 90 1/8 - 1 .09 - .75 100 / 200
0 - 180 1/4 - 2 .19 - 1.5
LGC400-10-QDT Chassis 10* 115 0 - 90 1/8 - 1 .09 - .75 50 / 100 No No No
230 0 - 90 1/8 - 1 .09 - .75 100 / 200
0 - 180 1/4 - 2 .19 - 1.5
LGC410-1.5 NEMA 1 1.5 115 0 - 90 1/20 - 1/8 .04 - .09 50 / 100 No No No
230 0 - 90 1/20 - 1/8 .04 - .09 100 / 200
0 - 180 1/10 - 1/4 .07 - .19
LGC410-10 NEMA 1 10** 115 0 - 90 1/8 - 1 .09 - .75 50 / 100 No No No
230 0 - 90 1/8 - 1 .09 - .75 100 / 200
0 - 180 1/4 - 2 .19 - 1.5
LGC430-1.5 NEMA 1 1.5 115 0 - 90 1/20 - 1/8 .04 - .09 50 / 100 Yes
(Dynamic
Braking
Resistor)
Yes
(Armature
Switching)
No
230 0 - 90 1/20 - 1/8 .04 - .09 100 / 200
0 - 180 1/10 - 1/4 .07 - .19
LGC430-10 NEMA 1 10** 115 0 - 90 1/8 - 1 .09 - .75 50 / 100 Yes
(Dynamic
Braking
Resistor)
Yes
(Armature
Switching)
No
230 0 - 90 1/8 - 1 .09 - .75 100 / 200
0 - 180 1/4 - 2 .19 - 1.5
LGC440-1.5 NEMA 4X 1.5 115 0 - 90 1/20 - 1/8 .04 - .09 50 / 100 No No No
230 0 - 90 1/20 - 1/8 .04 - .09 100 / 200
0 - 180 1/10 - 1/4 .07 - .19
LGC440-10 NEMA 4X 10 115 0 - 90 1/8 - 1 .09 - .75 50 / 100 No No No
230 0 - 90 1/8 - 1 .09 - .75 100 / 200
0 - 180 1/4 - 2 .19 - 1.5
* Heat sink kit 223-0159 must be used when the continuous output current is above 5 amps.
** Heat sink kit 223-0174 must be used when the continuous output current is above 5 amps.

The LGC series is our most widely used series for general purpose 90/180 VDC brushed DC motor applications. This compact, non-filtered SCR drive series offers many user friendly adjustments. With the use of the on-board trim pots you can quickly set maximum speed, acceleration rate, deceleration rate, current limit, speed regulation, and minimum speed of your motor. With abilities to accept 115 or 230 VAC single phase power, run permanent magnet or field-wound motors, and by offering many NEMA packaging options, the LGC series can easily satisfy most of your motor driving needs.