ACF Series

Model
Number
Enclosure Maximum
Current
(AAC)
Input
Voltage (VAC)
Freq (Hz)
Phase
Output Power Range Braking Reversing Isolation
Voltage
(VAC)
Freq
(Hz)
Phase HP kW
ACF700-0.65 Chassis 0.65 115 / 230
50 / 60
0 - 115 50 / 60 1Φ / 3Φ 1/100 - 1/16 .01 - .05 Yes
(DC Injection)
Yes No
0 - 230 1/50 - 1/8 .02 - .09
ACF700-2.4 Chassis 2.4 115 / 230
50 / 60
0 - 115 50 / 60 1Φ / 3Φ 1/16 - 1/4 .05 - .19 Yes
(DC Injection)
Yes No
0 - 230 1/8 - 1/2 .09 - .37
ACF700-4 Chassis 4.0 115 / 230
50 / 60
0 - 115 50 / 60 1Φ / 3Φ 1/8 - 1/2 .09 - .37 Yes
(DC Injection)
Yes No
0 - 230 1/4 - 1 .19 - .75

The ACF series is a microprocessor based AC adjustable frequency drives. These drives look and act like DC drives, meaning quick and easy setup without any programming. These drives are equipped with user adjustable trim pots to set Max. Speed, Min. Speed, Slip Comp, Boost, TQ Limit, Accel and Decel / Injection Braking parameters. ACF700 drives allow a 115 or 230 VAC input with a 115 or 230 VAC out, independent of the input potential. This is because the ACF700 is equipped with a unique voltage doubling capability that allows you to run a 230 VAC motor when only a 115 VAC single phase power is available. While the input is single phase, the output can be single or three phase. The drive’s internal carrier frequency can easily be changed from 16kHz to 1.6kHz to minimize switching losses or reduce electrical interference. Stopping methods include coast to stop or DC injection braking. Incorporated into the design is a microprocessor which provides flexibility of creating custom programs that can include specific user setting for OEM applications. These full featured and compact AC variable frequency drives are the perfect choice to run any 3 phase, and some single phase motors, rated at 4 amps or below.