PMF Series

Model
Number
Enclosure Maximum
Current
(AAC)
Input
Voltage (VAC)
Freq (Hz)
Phase
Output Power Range Braking Reversing Isolation
Voltage
(VAC)
Freq
(Hz)
Phase HP kW
PMF703-3 Chassis 3.0* 115 or 230
50 / 60
0 - 115 50 / 60 1Φ / 3Φ 1/16 - 3/8 .05 - .28 Yes
(DC Injection)
Yes 0 ± 5, 0 ± 10 VDC
4-20 mA
0 - 230 50 / 60 1Φ / 3Φ 1/8 - 3/4 .09 - .56
PMF703-5 Chassis 5.0** 115 or 230
50 / 60
0 - 115 50 / 60 1Φ / 3Φ 1/16 - 3/4 .05 - .56 Yes
(DC Injection)
Yes 0 ± 5, 0 ± 10 VDC
4-20 mA
0 - 230 50 / 60 1Φ / 3Φ 1/8 - 1 1/2 .09 - 1.1
* When mounted parallel with wall / perpendicular to ground. De-rate to 2.5 amps when mounted in any other configuration.
** When mounted to allow upwards air flow through the heat sink fins. De-rate to 4.0 amps when mounted in any other configuration.

The PMF Series is a variable frequency drive designed to run 115 or 230 VAC motors, whether single phase or three phase, at 50 or 60 Hz. With our "Doubler Mode", a 115 VAC line can be doubled to control 230 VAC motors. And unlike most variable frequency drives, the PMF Series will allow a 230 VAC output to be set with a base frequency of 50 or 60 Hz at 115 VAC. With the use of on-board trim pots, you can quickly set the maximum and minimum speeds, acceleration and deceleration rates, current limits, slip compensation, and DC injection braking and time. Each drive is designed with built-in isolation so it can be commanded with a wide range of analog inputs. The microprocessor based design means it can be modified to fit OEM specific applications.