LGP Series

Model
Number
Enclosure Maximum
Current
(ADC)
Input
Voltage
(VAC)
Output
Voltage
(VDC)
Power Range Field / Shunt
Supply
(VDC)
Braking Reversing Isolation
HP kW

LGP101-2

Chassis 2 115 0 - 90 1/20 - 1/6 .04 - .12 No No No 0 - 10 VDC

LGP101-10

Chassis 10* 115 0 - 90 1/4 - 1 .19 - .75 No No No 0 - 10 VDC
LGP301-10 Chassis 10* 230 0 - 90 1/4 - 1 .19 - .75 No No No 0 - 10 VDC
0 - 180 1/2 - 2 .37 - 1.5
LGP403-10 Chassis 10 115 0 - 90 1/4 - 1 .19 - .75 50 / 100 No No 0 - 10 VDC
4 - 20 mA
230 0 - 90 1/4 - 1 .19 - .75 100 / 200
0 - 180 1/2 - 2 .37 - 1.5
LGP443-3 NEMA 4X 3 115 0 - 90 1/10 - 1/4 .07 - .19 50 / 100 No No 0 - 10 VDC
4 - 20 mA
230 0 - 90 1/10 - 1/4 .07 - .19 100 / 200
0 - 180 1/6 - 1/2 .12 - .37
LGP443-10 NEMA 4X 10 115 0 - 90 1/4 - 1 .19 - .75 50 / 100 No No 0 - 10 VDC
4 - 20 mA
230 0 - 90 1/4 - 1 .19 - .75 100 / 200
0 - 180 1/2 - 2 .37 - 1.5
* Heat sink kit 223-0159 must be used when the continuous output current is above 5 amps.

The LGP series is a non-filtered SCR drive with isolation designed to run permanent magnet DC motors. These 1Q drives can accept any 0-10 VDC (or 4-20 mA for some models) signal range for motor speed control. Single voltage units utilize our compact industry standard footprint, while dual voltage units come pre-mounted on a heat sink or installed in NEMA 4X enclosures.