Subscribe!

Name
Email
Submit

To download, please submit the following

PWL Series

The PWL series adds to the versatility of our PWM offering by adding field voltage outputs for shunt-wound motors. With on-board selector switches, this series can easily be setup to accept 115 VAC or 230 VAC power. This full featured series comes with on-board fusing and cage clamp terminals to make installation simple and quick. Available in an open chassis style or NEMA 4X for applications that require protection from moisture. The almost pure DC output of the PWL series allows motors to run more efficiently and at lower speeds while achieving full torque than with the use of SCR type drives. With a wide selection of models that can run motors from 1/20 HP all the way up to 3 HP, you’re sure to find a drive that will satisfy your needs.


 PWL440-10-JOG

Model
Number		 Enclosure Maximum
Current
(ADC)		 Input
Voltage
(VAC)		 Output
Voltage
(VDC)		 Power Range Field / Shunt
Supply		 Reversing Isolation
HP kW
PWL400-3 Chassis 3
 115 0 - 90 / 130 1/20 - 1/4 .04 - .20
 50 / 100 No No
230 0 - 90 / 130 1/20 - 1/4 .04 - .20 100 / 200
0 - 180 / 240 1/10 - 1/2 .08 - .40
PWL400-5 Chassis 5 115 0 - 90 / 130 1/8 - 1/2 .10 - .40 50 / 100 No No
230 0 - 90 / 130 1/8 - 1/2 .10 - .40 100 / 200
0 - 180 / 240 1/4 - 1 .20 - .75
PWL400-10 Chassis 10* 115 0 - 90 / 130 1/4 - 1 .20 - .75 50 / 100 No No
230 0 - 90 / 130 1/4 - 1 .20 - .75 100 / 200
0 - 180 / 240 1/2 - 2 .40 - 1.5
PWL400-15 Chassis 15 115 0 - 90 / 130 1/4 - 1 1/2
 .20 - 1.1 50 / 100 No No
230 0 - 90 / 130 1/4 - 1 1/2
 .20 - 1.1 100 / 200
0 - 180 / 240 1/2 - 3
 .40 - 2.3
PWL440-3 NEMA 4X
 3 115 0 - 90 / 130 1/20 - 1/4 .04 - .20 50 / 100 No No
230 0 - 90 / 130 1/20 - 1/4 .04 - .20 100 / 200
0 - 180 / 240 1/10 - 1/2
 .08 - .40
PWL440-10 NEMA 4X
 10 115 0 - 90 / 130 1/4 - 1 .20 - .75 50 / 100 No No
230 0 - 90 / 130 1/4 - 1 .20 - .75 100 / 200
0 - 180 / 240 1/2 - 2 .40 - 1.5
PWL440-10-JOG NEMA 4X
 10 115 0 - 90 / 130 1/4 - 1
 .20 - .75 50 / 100 No No
230 0 - 90 / 130 1/4 - 1
 .20 - .75 100 / 200
0 - 180 / 240 1/2 - 2
 .40 - 1.5
* Heat sink kit HSK-0003 must be used when the continuous output current is above 5 amps.


©2011 by American Control Electronics